Floor Guard drip catcher composites
Spunbond pp / meltblown pp / polyethylene film composites have a durable, abrasion-resistant top membrane, a fluffy, highly absorbent center layer, and an impermeable film backing. Insert a pad under any leak and feel confident knowing the fluid won't leach through to your floor. Floor Guard is available in two sizes.
-
impermeable backing keeps floors dry
-
absorbs oil, water, coolants, and solvents
-
abrasion-resistant spunbond pp top layer
-
highly absorbent meltblown pp center
-
catches drips under vehicles
-
catches drips under leaky machines
-
low profile (fits into tight spaces)
-
melting point is 320 degrees
-
durable top layer
-
absorbent center
-
leak-proof bottom
all universal compositions: product offering consists of one, two, and three layer compositions, combining meltblown and spunbond polypropylene
specialty compositions:
composites are available with printed spunbond pp, as well as polyethylene film backing to prevent leaching through to the surface beneath it.
Our absorbent composites range in density from as low as 130 gsm to as high 700 gsm, (grams per square meter) although our standard range is between 150 and 400 gsm. Three layer composites tend to be on the higher end of the range, as the center layer represents a lower percentage of the overall unit in comparison to single-ply and two-layer composites.
