Pads | Anchor Mat

oil spill pads (oil-only)

Standard meltblown polypropylene sorbents are great for absorbing hydrocarbon-based fluids off of the surface of water. The open fiber construction quickly draws oil into the lofty meltblown web. Oil spill pads are commonly used in conjunction with booms, rolls, and sweeps.

bonded pads (oil-only)

Point bonded meltblown polypropylene sorbents have an open fiber construction that draws in high viscosity fluids. Bond points tie down loose fibers. Bonded pads are great for both environmental spill clean-up and for maintenance applications to absorb hydrocarbon-based fluids.

bonded pads (universal)

Point bonded meltblown polypropylene sorbents have an open fiber construction that draws in high viscosity fluids. Bond points tie down loose fibers. Bonded pads are great for all maintenance applications to absorb oil, water, coolants, solvents, and many more non-aggressive fluids.

bonded (hazmat)

Point bonded meltblown polypropylene sorbents have an open fiber construction that quickly attracts and absorbs high viscosity fluids and toxic sludge. Thermal bond points tie down loose fibers to alleviate linting. Use bonded pads to absorb most aggressive fluids, such as acids and bases.

SMS pads (oil-only)

Spunbond polypropylene membranes are smooth, durable, and abrasion-resistant. They withstand wear and tear, and they are great for wiping down greasy tools and equipment. The lofty meltblown polypropylene center layer is highly absorbent and wicks up hydrocarbon-based fluids quickly.

SMS pads (universal)

FMF pads (oil-only)

Fine fiber meltblown polypropylene composites have a soft microfiber membrane on both sides of the pad. They grip many surfaces when saturated, and they also remove the sheen from your floors. FMF is our highest quality oil-only sorbent.

FMF pads (universal)

FMF pads (hazmat)

Fine fiber polypropylene composites have microfiber textures and are soft like tissue paper. They tend to grip many surfaces when saturated, and they remove the sheen. Use these pads in laboratories and near chemical storage areas to absorb aggressive chemicals or most any other fluids that spill.

SMF pads (universal)

Spunbond/Meltblown/Fine Fiber pads are our highest quality nonwoven composites. The spunbond side is smooth and abrasion-resistant, which is great for wiping applications. The fine fiber (microfiber) side has a gripping characteristic when saturated and removes the sheen from most surfaces.

SM pads (oil-only)

Spunbond/Meltblown polypropylene composite is a dual-textured product. The spunbond polypropylene side is durable, abrasion-resistant, and great for wiping. The meltblown polypropylene side has an open fiber construction for absorbing viscous fluids. Use SM for both oil spill applications and for MRO applications.

SM pads (universal)

drum tops (oil-only)

Drum toppers are round pads that fit on top of 55 gallon drums and catch the inevitable drips after pumping. Each pad has two bungholes for pumping and for filling.

drum tops (universal)

Drum toppers are round pads that fit on top of 55 gallon drums and catch the inevitable drips after pumping. Each pad has two bungholes for pumping and for filling.

SM pads (slip hazard universal)

Slip hazard mats replace slip hazard signs, mops, and mop buckets. They warn of hazards while absorbing the spilled fluids. These versatile sorbents are great for well-trafficked walkways or for use as a general maintenance pad. The high-visibility yellow color is very noticeable.

SM plus film (Floor Guard)

Floor Guard drip mats absorb drips and prevent the fluids from leaching through to your floors. Use Floor Guard under vehicles, forklifts, machinery, horizontal drums, or leaky roofs. Floor Guard is available in two sizes: 30 x 30" or 15 x 18"